DESCRIPTION

The CP65 series of isolators is an all attitude, high frequency, center plate mount that is ovaloid configuration.  Most mounts in the series are sized to perform high levels of vibration isolation of input frequencies >60Hz at rated loads. Snubbing washers are used to prevent structural overloading or shock impact damage as well as make the installation self-captivating or fail-safe.  Silicone (standard) elastomer makes the CP65 effective in applications where a high level of damping is required.  Standard MS size mount geometry throughout the series makes for easy mount and performance upgrade when payload changes in mission or load.

Airborne Avionics and Electronics

Missile Electronics

Load Range of 1.5 – 18 Pounds

Natural Frequency of 25 – 40 Hz at Rated Load

Transmissibility at Resonance = 4.0 Max

Isolates Most Sinusoidal Vibration Inputs >60Hz at Rated Load

Performs Well in Random Vibration Environments.  (Consult with Shock Tech Engineering)

Axial to Radial Stiffness Ratio 1:1

30G, 11 Millisecond, Half Sine Shock Input Crash Safety Payload Retention Capability When Installed With Snubbing Washer

Mounting Geometry is Consistent with MS Standards and Similar Mounts

Core Geometry is Available in Threaded or Un-Threaded Through Configuration.

All Attitude Capable. Base (Axial) or Bulkhead (Radial) Mounting Geometry is Possible as Long as Adequate Clearance Space is Available Behind Mount.

No Special Tools Required