DESCRIPTION

The CM96 series of isolators is an all attitude, low frequency, base plate mount that is available in square, 4 hole plate configuration.  All mounts in the series perform high levels of vibration isolation of input frequencies >20Hz at rated loads.  Silicone (standard) elastomer makes the CM96 effective in random vibration environments and applications where a high level of damping is required.  Standard MS size mount geometry throughout the series makes for easy mount and performance upgrade when payload changes in mission or load.  Meets environmental requirements of Mil-E-5400 and Mil-Std-810.

Airborne Avionics and Electronics

Vehicle Electronics

Load Range of 22 – 154 Pounds

Natural Frequency of 6 – 12 Hz at Rated Load

Transmissibility at Resonance = 4 Max. (Silicone)

Isolates Most Sinusoidal Vibration Inputs >20Hz at Rated Load

Performs Well in Random Vibration Environments.  (Consult with Shock Tech Engineering)

Axial to Radial Stiffness Ratio 1:0.8

30G, 11 Millisecond, Half Sine Shock Input Crash Safety Payload Retention Capability When Installed With Safety Strap.

Mounting Geometry is Consistent with MS Standards

Core Geometry is M6 Threaded or Un-Threaded Through Configuration.

All Attitude Capable. Base (Axial) or Bulkhead (Radial) Mounting Geometry is Possible (Consult with Shock Tech Engineering)

No Special Tools Required