DESCRIPTION

The ARCH5 Series is a mid frequency, high deflection mount designed for attenuation of high energy shock inputs.  Attenuated MIL-S-901C and MIL-S-901D input to <20G's at listed static load ratings.  They also perform good vibration isolation of input frequencies >30Hz at rated loads.  Material choices allow for higher damping or low temperature performance if required.  Standard mount geometry throughout the series makes for easy mount and performance upgrade within the series as well as to other SHOCK TECH ARCH series size mounts when payload changes in mission or load.

Shipboard Equipment and Racks Requiring Attenuation of MIL-S-901C Medium Weight Shock Machine Impact Input or MIL-S-901D Heavyweight Barge Inputs.

Shipping Containers

Pallets

Skids

Equipment installed in Transportable Shelters

Load Range of 75 – 250 Pounds

Natural Frequency of 7 – 10 Hz at Rated Load

Transmissibility at Resonance = 7.0 - 3.5 Max

Operating Temperature: -20°F to  +180°F (Neoprene)

Isolates Most Sinusoidal Vibration Inputs >20Hz at Rated Load

Axial to Radial Stiffness Ratio: 2:1

Self Captivating Payload Retention Capability When Installed With Restraining Strap or Cable

Mounting Geometry is Consistent Within the Series, with Other Size Shock Tech ARCH Series as well as Similar Type Mounts.

Top Mounting Plate Geometry is Threaded .375-16 UNC-2B Through Configuration.

Base Mounting Plates are Ø0.281 Through Hole Configuration

Base (Axial loading) Mounting is Standard

Bulkhead (Radial loading) Mounting Geometry is Possible for Stabilizer, High Center of Gravity and Some Primary Load Carrying Mounting Configurations (Consult with Shock Tech Engineering).

No Special Tools Required.