 |
 |
 |
 |
 |
 |
|
|
|
|
DESCRIPTION
Shock-Tech’s “Fluidic” (fluid filled) family of isolators were developed to provide solution for low frequency attenuation problems. They are ideal for applications where the prominent disturbing frequency is low, space to install an isolator is limited, and drift/creep associated with low frequency isolators will cause excessive static deflection, bottoming, resulting in performance fluctuations and causing premature equipment failure. If you have such a condition the Fluidic Mount is the solution to your vibration problem.
Protection of commercial grade ground mobile and COTS electronics on tracked vehicles against military shock and vibration specifications.
Fixed Wing avionics and electronics.
Excellent for Helicopter avionics and electronics.
Shipboard equipment.
Trays and rack systems.
Vehicular electronics requiring vibration isolation.Fn range
when loaded to specified weights: 6-25 Hertz.
Static load range: 30-290 LBS (Ground Vehicle) 15-290 LBS (Airborne) per mount.
Tmax = 3
Maximum axial deflection: .3 - .6 inches.
Axial:Radial Frequency Ratio = 1:0.8
Meets MIL-STD-810E shock and vibration environments including ON THE MOVE requirements.
M113, M577, M1A1, M1A2, M109A6, BRADLEY: Tested and specified by CECOM/TACOM for use per MIL-STD-810E for protection of COTS equipment.
Materials: Structural Metals = Stainless Steel, Resilient element = Neoprene, Damping Fluid = Silicone Gel
Max. Temperature Range: -40F to +195F.
Ozone, corrosion and fungus resistant.
Low Frequency capabilities without drift and creep characteristics typical of many low frequency mounts.
High level of damping and useful deflection for load range.
Long service life.
Installation interface geometry consistent with MS sizes.