|
 |
|
|
|
BUSHING MOUNT
|
|
SELECTION |
|
MATRIX |
|
|
     |
|
Solutions for Shock,
Vibration & Noise Control |
|
|
|
Assembly Description: |
 |
 |
|
·
Can be all elastomer or all metal. |
|
·
Can incorporate
either a loose or bonded metal pre-load tube core. |
|
·
Can incorporate bonded metal
interface contact plates. |
|
·
Can be Symmetrical. |
|
Load Carrying Description: |
|
·
Designed to carry the primary load axially through the
mount. |
|
·
Annular ring is in compression when supporting the
static load axially. |
|
·
Solid bushings carry the
radial load in compression. |
Fail Safe/Self Captivating: |
|
·
Voided bushings carry the
radial load in shear. |
·
Made fail safe when used with the appropriate hardware
that includes a |
|
Dynamic Application: |
back-up or snubbing washer
available for that purpose. |
|
·
Best for vibration isolation |
·
Alternate method: Made fail safe when used with a custom
restraining |
|
·
Limited shock attenuation |
strap made for the
application. |
|
SHOCK TECH BUSHING MOUNT TYPES |
|
|
|
|
|
|
|
|
|
One Piece Bushings; All
Elastomer Construction |
|
CP20 Series Data |
 |
.5 - 10 LBS |
Vibration |
>20Hz |
Yes |
Yes |
|
HTML |
PDF |
|
CP51 Series Data |
 |
.5 - 50 LBS |
Vibration |
>20Hz |
No |
Yes |
|
HTML |
PDF |
|
RB20 Series Data |
 |
1 - 12 LBS |
Vibration |
>20Hz |
No |
Yes |
|
HTML |
PDF |
|
Ring and Bushing; One and Two Piece all Elastomer Construction |
|
RB10 Series Data |
 |
1 - 3 LBS |
Vibration |
15 - 25Hz |
No |
Yes |
|
HTML |
PDF |
|
RB30 Series Data |
 |
1 - 3 LBS (w/RB10) |
Vibration (w/RB10) |
15 - 25Hz (w/RB10) |
No (w/RB10) |
Yes (w/RB10) |
|
HTML |
PDF |
|
Bonded Bushing; Elastomer and Metal Construction with Bonded Center Core |
|
MM12 Series Data |
 |
.6 - 1.75 LBS |
Vibration |
115 - 175Hz |
No |
Yes |
|
HTML |
PDF |
|
MM24 Series Data |
 |
1 - 5 LBS |
Vibration |
185 - 230Hz |
No |
Yes |
|
HTML |
PDF |
|
RB1-5 Series Data |
 |
1 - 4,560 LBS |
Vibration |
10 - 20Hz |
Yes |
Yes |
|
HTML |
PDF |
|
Armor Plated Voided Center Bushing; Elastomer and Metal Construction
with Bonded Inner Contact Plate. Loose or Bonded Center Core
Option. |
|
VAB Series
Data |
 |
1 - 4,560 LBS |
Vibration |
10 - 20Hz |
No |
No |
|
HTML |
PDF |
|
VABB Series Data |
 |
1 - 4,560 LBS |
Vibration |
10 - 20Hz |
No |
No |
|
HTML |
PDF |
|
Wire Mesh Stand Alone Bushings |
|
WM700 Bushings Data |
|
10 - 20 LBS |
Vibration |
>12Hz |
No |
No |
|
HTML |
PDF |
|
ÝTOP
OF PAGEÝ |
|
MOUNT DESCRIPTION DEFINITIONS |
|
Frequency: |
Low = 10 Hz
and below |
| Mid = 10 Hz
to 20 Hz |
| High = 20
Hz and above |
|
| All
Attitude: |
Yes =
isolators are able to carry static load in any direction; No = isolators are
designed to carry static load axially. |
|
| * : |
Indicates
base loading only. |
|
| 1:1
Stiffness: |
Refers to
axial-to-radial stiffness ratio. |
|
| Primary
Application: |
This
indicates the type of dynamic environment that the particular mount was primarily designed for. |
|
 |
|
CONTENTS COPYRIGHT SHOCK
TECH INC. 2011 |
|